Volkswagen Golf Service & Repair Manual: Parking aid
- Assembly overview - front parking aid, LHD vehicles
- Assembly overview - rear parking aid, LHD vehicles
- Assembly overview - front parking aid, RHD vehicles
- Assembly overview - rear parking aid, RHD vehicles
- Removing and installing parking aid control unit -J446-, left-hand drive vehicle
- Removing and installing parking aid control unit -J446-, RHD vehicle
- Removing and installing front parking aid warning buzzer -H22-, LHD vehicles
- Removing and installing front parking aid warning buzzer -H22-, RHD vehicles
- Removing and installing rear parking aid warning buzzer -H15-
- Removing and installing front parking aid senders
- Removing and installing rear parking aid senders
Removing and installing steering lock housing
Special tools and workshop equipment
required
Socket -T10424-
Removing
–
Remove ste ...
Assembly overview - front parking aid, LHD vehicles
1 -
Front parking aid warning buzzer -H22-
Only for 8-channel parking aid
Removing and installing
→ Chapter
2&n ...
Other materials:
Adjusting Bowden cable A for entry assistance
Special tools and workshop equipment
required
Feeler gauges -VAS 5301/10-
Adjusting conditions
Seat pan and backrest must be padded and bolted
together.
...
Calibrating Blind Spot Monitor control unit -J1086-/-J1087-
Note
Before the actual calibration process of the control units,
the calibration unit -VAS 6350- needs to be set up as described
in the following chapter.
Special tools and workshop equipment
required
...
Adjusting headlight installation position
Special tools and workshop equipment
required
Torque wrench -V.A.G 1783-
Torque screwdriver -VAS 6494-
...
