Volkswagen Golf Service & Repair Manual: Removing and installing front parking aid warning buzzer -H22-, LHD vehicles

Volkswagen Golf Service & Repair Manual / Electrical system / Lights, lamps, switches outside / Parking aid / Removing and installing front parking aid warning buzzer -H22-, LHD vehicles

Removing

–	Remove trim under dash panel → General body repairs, interior; Rep. gr.68.

–	Using a small screwdriver -1-, press front parking aid warning buzzer -H22--3- out of mounting -2--arrow-.

–	Remove front parking aid warning buzzer -H22-.

–	Disconnect electrical connector -4-.

Installing

Installation is carried out in the reverse sequence.

Removing and installing front parking aid warning buzzer -H22-, LHD vehicles

Removing and installing parking aid control unit -J446-, RHD vehicle

Note When renewing the control unit, select Renew function for the respective control unit in Guided fault finding or Guided functions mode &# ...

Removing and installing front parking aid warning buzzer -H22-, RHD vehicles

Removing – Remove glove compartment → General body repairs, Interior; Rep. gr.68. ...

Other materials:

Removing and installing button for deactivating interior monitoring and vehicle inclination sensor -E616-
Special tools and workshop equipment required Removal wedge -3409- Note The removal and installation procedures are described for LHD vehicles. Removal and ins ...

Belt height adjuster
Fig. 68 Next to the front seats: belt height adjuster First read and observe the introductory information and safety warnings The seat belt height adjusters for the front seats can be used to adjust the position of the seat belt on the shoulder so that it can be fastened properly: P ...

Removing and installing roof aerial -RX5-
Special tools and workshop equipment required Torque wrench -V.A.G 1783- Note Aerial wirings are directly plugged at the base of roof aerial -RX5-. ...