Test prerequisites
Check wheel suspension, wheel bearing assembly and steering
for excessive play and damage.
Tread depth difference of no more than 2 mm on one axle.
Tyres inflated to correct pressures.
...
Removing and installing electronically controlled damping control unit
-J250-, saloon
Special tools and workshop equipment
required
Vehicle diagnostic tester
Removing
Location: electronically controlled damping control unit
-J250- is installed behind left luggage compartment s ...
Removing and installing brake caliper, FS III front brake
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331-
Brake pedal actuator -V.A.G 1869/2-
...