Volkswagen Golf Service & Repair Manual: Paint thickness tester -VAS 5278

Volkswagen Golf Service & Repair Manual / General information, paint / Workshop equipment / Tools / Paint thickness tester -VAS 5278

Designation:

Paint thickness tester -VAS 5278-

Product description

The paint thickness tester allows precise and non-destructive paint thickness measurement on steel and iron or non-ferrous metals. The electronic tester with LCD digital display indicates the measurement data according to selection via the menu.

Technical data

Continuous measuring range: 0-5000 µm or 0-200 mils

Tolerance: +/- 1 µm or +/- 0.06 mils

Temperature range: 0 °C to 60 °C

Power supply: 9 Volt alkaline

4-digit liquid crystal display (LCD)

Items supplied:

1 tester for steel and iron

1 tester for non-ferrous metals

1 carrying case

2 zero plates

Operating instructions

Paint thickness tester -VAS 6197

Designation: Paint thickness tester -VAS 6197- Product description Fully electronic paint thickness tes ...

Stone chip tester -VAS 5102A

Designation: Stone chip tester -VAS 5102A- Product description The stone chip tester -VAS 5102A- has be ...

Other materials:

Introduction
This chapter contains information on the following subjects: → Jump lead connection point (earth connection) → How to start the engine using jump leads If the engine fails to start because the vehicle battery is flat, the flat battery can be connected to the battery of another ...

Removing and installing fresh air blower control unit -J126-, RHD vehicles
Removing – Remove baffle plate → Chapter. – Disconnect electrical connectors -1- and -4-. – Remove bolts ...

Removing and installing D-pillar trim
Note Removal and installation are described for the left vehicle side. Follow same instructions for the right side as appropriate. Special tools and workshop equipment required ...