Volkswagen Golf Service & Repair Manual: Pneumatic brush grinder set -VAS 6446
Pneumatic brush grinder set -VAS 6446- |
The pneumatic brush grinder set -VAS 6446- serves as a
surface treatment tool. |
Suitable for removal of undercoating, sealants and other
adhesive materials. Corrosion removal and paint removal in body
area. With pore-deep cleaning and sand blasting effect, protects
the material and has a material compressing effect. Low speed. |
1 pneumatic brush grinder set |
1 holder for brush grinder strap 23/28 mm |
1 holder for brush grinder strap 11/28 mm |
1 brush grinder strap 23/28 mm |
2 brush grinder straps 11/28 mm |
3 special brush grinder straps 11/28/17 mm |
|
|
|
Designation:
Stone chip tester -VAS 5102A-
Product description
The stone chip tester -VAS 5102A- has be ...
Designation:
Brush grinder set -VAS 6776-
Product description:
The device is designed to clean surfaces ...
Other materials:
Safety precautions when working on the cooling system
Risk of scalding by hot coolant
When the engine is warm, the cooling system is under pressure.
Danger of scalding due to steam and hot coolant.
–
Always wear safety gloves.
–
Always wear safety goggles.
– ...
Removing and installing tail light
Note
Removal and installation are described for the left side.
Removal and installation on the right side are carried out in
the same way.
If the event of a defective LED, the entire tail light needs
to be rene ...
Assembly overview - drive unit of air conditioner compressor, Golf GTE
1 -
Electrical air conditioner compressor -V470-
With control unit for air conditioner compressor -J842- and
electrical air conditioner compressor -V470-
→ Chapter „Removing air conditioner compressor from and installing t ...
© 2016-2023 Copyright www.vwgolf.org
