Cavity sealing, rear body
Technical dataRemoving and installing lower steering column trim
Special tools and workshop equipment
required
Torque wrench -V.A.G 1783-
Removing
–
Remove upper steering column trim
→ Chapter.
...
Removing and installing high-voltage heater (PTC) -Z115- / high-voltage
heater (PTC) -J848
Special tools and workshop equipment
required
Commercially available Torx socket bit “TS30H” with hole in
front face
Hose clamps, up to 25 mm -3094-
Engine bung set -VAS 6122- ...
Assembly overview - skid plate
Note
The removal and installation procedures may have to be modified
slightly depending on engine fitted.
1 -
Underride guard
Removing
–
Remove bolts -2-,
-3- and -4-.
–
Pull out noise ...