Volkswagen Golf Service & Repair Manual: Safety instructions
- Safety precautions when handling refrigerants
- Safety precautions for working on vehicles with start-stop system
- Safety precautions when working on high-voltage system
- Safety precautions when working in the vicinity of high-voltage components
- Safety precautions when working on the cooling system
- Safety precautions for working on vehicles with auxiliary/supplementary heater
Technical data
...
Safety precautions when handling refrigerants
Risk of freezing injury caused by refrigerant
When working on the air conditioning system, there is a risk of
highly pressurised refrigerant escaping from the system. There is ...
Other materials:
Removing and installing wheel bearing unit, multi-link suspension,
front-wheel drive
Special tools and workshop equipment required
Fitting sleeve -3241/4-
Hub grease cap puller -VW 637/2-
Torque wrench -V.A.G 1332-
Tool insert -T10162 A-
Torque wrench -V.A.G 1410-
...
Wax-based underseal -D 316 000 A1
Designation:
Wax-based underseal -D 316 000 A1-
Issued 01.2008
Product description
Wax underseal -D 316 000 A1- offers excellent long-term
underbody corrosion protection.
...
Assembly overview - toothed belt, engine codes CPTA, CHPA, CZEA, CZDA
1 -
Toothed belt
Before removing, mark direction of rotation with chalk or
felt-tipped marker pen.
Check for wear
Removing
→ Chapter
Installing (adjusting valve timing), CPTA, CZEA
& ...
