Assembly overview - poly V-belt drive, vehicles without air conditioner
compressor
1 -
Bolt
Renew
150 Nm +180°
Use counterhold -T10475- to loosen and tighten.
Risk of damage to engine caused by incorrect valve timing.Do not turn crankshaft
out of TDC position.
2 -
...
Assembly overview - starter, vehicles with dual clutch gearbox (DQ250-6F)
1 -
Starter -B-
Removing and installing
→ Chapter
2 -
Bolt
Specified torque: 40 Nm
3 -
Electrical connector
4 -
Nut
Speci ...
Removing and installing coolant temperature sender -G62
Removing
Engine cold
–
Briefly open cap of coolant expansion tank
-arrow- in order to release
residual pressure in the cooling system, then tighten the cap
...