Instructions for work on underbody and stone chip protection
Note
The structure of the underbody and stone chip protection is
to be reconstructed to conform to the original condition in
appearance and thickness.
Water drainage holes must remain clear.
...
Bleeding coolant circuit of auxiliary heater
The removal and installation procedures for the auxiliary
heater and the circulation pump -V55- described in this Workshop
Manual ensure that only a small quantity of air enters or
remains in the coolant circuit. Therefore it is not necessary to
bleed th ...
Removing and installing front turn signal bulb -M5-/-M7- (gas discharge
headlights)
Note
Removal and installation are described for the left side.
Removal and installation on the right side are carried out in
the same way.
If the left turn signal bulb on vehicles with TDI engine
cannot be remo ...