Volkswagen Golf Service & Repair Manual: Adaptive cruise control
- Overview of fitting locations – adaptive cruise control, variant 1
- Overview of fitting locations – adaptive cruise control, variant 2
- Removing and installing automatic distance control unit, variant 1
- Removing automatic distance control unit from and installing on retaining plate, variant 1
- Removing automatic distance control unit from and installing on retaining plate, variant 2
- Removing automatic distance control unit from and installing on retaining plate, variant 2
- Removing automatic distance control unit from and installing on adapter frame, variant 2
- Calibrating adaptive cruise control
Overview of fitting locations – Start/Stop system
Note
Note safety precautions
→ Chapter.
The illustration shows fitting locations for LHD vehicles.
Fittin ...
Overview of fitting locations – adaptive cruise control, variant 1
1 -
Trim for radar sensor
2 -
Adaptive cruise control unit -J428-
Removing and installing
→ Chapter
...
Other materials:
Removing and installing oil separator
Special tools and workshop equipment
required
Flat scraper
Commercially available studs, M6x20 mm, qty. 2
Sealant remover
Sealant
→&nb ...
Removing and installing turbocharger
Special tools and workshop equipment
required
Engine bung set -VAS 6122-
Hose clip pliers -VAS 6362-
...
Corrosion protection for body components, add-on components and welded
components
Attachments
Wings, doors, covers and flaps must be coated completely on
the inside as well. One wet-in-wet spray pass is adequate for
this.
Before installing, add-on parts must be sealed with cav ...
