Volkswagen Golf Service & Repair Manual: Centre console
- Removing and installing front ashtray
- Removing and installing rear centre console trim
- Removing and installing centre console trim in footwell
- Removing and installing trim for operating and display unit
- Removing and installing centre console front storage compartment
- Removing and installing centre console cover
- Removing and installing centre console insert
- Removing and installing mounting plate with retaining strap
- Removing and installing centre console retainer, for all vehicles except e-Golf
- Removing and installing centre console retainer, securing bracket and insulation for selector mechanism, e-Golf only
Removing and installing bracket for roof grab handle
Note
Removal and installation is described for the left front
bracket for roof grab handle. Follow same instructions for the
remaining brackets for roo ...
Removing and installing front ashtray
Removing
–
Remove front ashtray -1-
upwards from centre console -2-.
Installing
Installat ...
Other materials:
Removing and installing door inner seal
During production, a sealant is applied to the door inner
seals, which are then placed on the door flange and rolled on.
Note
When removing the seal, the sealant is distributed across the
inside of the seal. The sides are bent upwards ...
Removing and installing Blind Spot Monitor control unit J1086/J1087
Removing
–
Disconnect electrical connector -2-.
–
Unscrew nut -1- and bolts
-4- for bracket.
...
Flat spots (from locking wheels)
Flat spots can result from an extreme brake application
which causes the wheels to lock, so that the rubber is worn off
at the contact patch between the tread and the road surface.
As the tyres slide over the road surface, friction generates
...
