Volkswagen Golf Service & Repair Manual: Battery
- Assembly overview – battery, vehicles without high-voltage system
- Assembly overview – battery, vehicles with high-voltage system
- Removing and installing battery, vehicles without high-voltage system
- Removing and installing battery, vehicles with high-voltage system
- Disconnecting and connecting battery, vehicles without high-voltage system
- Disconnecting and connecting battery, vehicles with high-voltage system
- Removing and installing battery tray
- Removing and installing earth wire with battery monitor control unit -J367-, vehicles without high-voltage system
- Removing and installing earth wire with battery monitor control unit -J367-, vehicles with high-voltage system
Assembly overview – battery, vehicles without high-voltage system
1 -
Retaining clip
2 -
Bolt
Specified torque: 15 Nm
3 -
Nut
Specified torque: 6 Nm
...
Other materials:
Rear axle
Overview - rear axle, torsion beam axle
I -
→ Chapter „Axle beam“
II -
→ Chapter „Suspension strut, shock absorber, spring“
III -
→ Chapter „Wheel bearing assembly, trailing a ...
Removing and installing dip beam screen motor -V294-/-V295
Note
Left dip beam screen motor -V294- and right dip beam screen
motor -V295- are only fitted on gas discharge headlights without
cornering light.
The dip beam screen motor is located in the headlight and
canno ...
Removing and installing tyre pressure sensor, Beru tyre pressure monitoring
system
View of Beru system
WARNING
After tyre sealant has been used, the tyre pressure
sensor of the respective wheel must be renewed.
...
