| Removing |
| – | Lift off lid for battery compartment → Chapter. |
| – | Remove bolt -1-. |
| – | Push cap -2- out from the ignition key laterally -arrow-. |
| Installing |
Note| Use the screw -1- to cut the thread in on a new cap. |
| – | Push cap -2- latterly onto the ignition key. |
| – | Screw in screw -1-. |
| – | Press lid onto battery compartment |
Removing and installing ignition key batteryCharging battery in maintenance mode with battery charger -VAS 5900-
Note
When a battery is being charged in the maintenance mode and
an electrical consumer draws current from the battery, the
battery charger -VAS 5900- automatically compensates the charge.
The maintenance mode can be ...
Assembly overview - sealing flange, belt pulley end
1 -
Bolt
Risk of damage to engine caused by incorrect valve timing.Do not turn crankshaft
out of TDC position.
Specified torque
→ Item
2 -
Vibration damper
Removing and installing
→&nb ...
Removing and installing air duct for defroster vent
Removing
–
Remove dash panel
→ General body repairs, interior; Rep. gr.70.
–
Unclip wiring harness -3- in
-direction of arrow- from sunli ...