Volkswagen Golf Service & Repair Manual: Sump, oil pump
- Assembly overview - sump and oil pump
- Removing and installing oil level and oil temperature sender -G266-
- Removing and installing lower part of sump
- Removing and installing oil pump
- Removing and installing upper part of sump
Assembly overview - sump and oil pump
Note
Metal shavings or a large quantity of small metal particles found
during engine repair could indicate that the crankshaft bearings or
conrod bearings are damaged. To ...
Other materials:
Fitting a bicycle carrier on the mechanically positioned ball coupling
First read and observe the introductory information
and safety warnings The maximum permitted load on a bicycle carrier mounted
on the ball coupling is 80 kg at a distance of 300 mm. This distance
refers to the gap between the centre of gravity of the bicycle carrier (complete
with bicycle ...
Removing and installing speed sensors on front axle -G45-/-G47-
Note
Removal and installation is described for the front left
speed sensor. Removal and installation of the front right speed
sensor is analogous.
Removing
–
Raise vehicle.
&n ...
Remedies when vehicle pulls to one side
Test conditions before and during the road test:
–
Check all suspension components on the front and rear axles
for damage.
–
Check tyre pressure and correct if necessary.
–& ...
