Volkswagen Golf Service & Repair Manual: Control unit and hydraulic unit
- Assembly overview - control unit and hydraulic unit, LHD vehicles
- Assembly overview - control unit and hydraulic unit, RHD vehicles
- Removing and installing control unit and hydraulic unit, LHD vehicles, petrol engines
- Removing and installing control unit and hydraulic unit, LHD vehicles, diesel engine
- Removing and installing control unit and hydraulic unit, LHD vehicles, four-wheel drive, diesel engine
- Removing and installing control unit and hydraulic unit, LHD vehicles, four-wheel drive, »R«
- Removing and installing control unit and hydraulic unit, RHD vehicles
- Separating control unit from hydraulic unit
- Fitting control unit to hydraulic unit
Overview of fitting locations
Overview of fitting locations - ABS/ESP
1 -
ABS control unit -J104-
Installation location: on hydraulic unit, on passenger side in
engine compartment.
...
Assembly overview - control unit and hydraulic unit, LHD vehicles
1 -
ABS control unit -J104-
Removing and installing
→ Chapter.
2 -
ABS hydraulic unit -N55-
Remov ...
Other materials:
Removing and installing engine oil cooler
Removing
–
Drain coolant
→ Chapter.
–
Remove intake manifold
→ Chapter.
–
Unscrew bolts -arro ...
Checking oil pressure
Special tools and workshop equipment
required
Oil pressure tester -V.A.G 1342-
Procedure
Oil level OK: checking
→ Booklet.
...
Sensors
Removing and installing steering angle
sender -G85-
Note
The steering angle sender -G85- is a component of the
steering rack.
It cannot be renewed as an individual part.
...
