Volkswagen Golf Service & Repair Manual: Safety precautions when working on the cooling system
| Risk of scalding by hot coolant |
| When the engine is warm, the cooling system is under pressure. Danger of scalding due to steam and hot coolant. |
| – | Always wear safety gloves. |
| – | Always wear safety goggles. |
| – | Proceed as follows to release the pressure: cover the cap of the coolant expansion tank with a cloth, and open it carefully. |
Safety precautions when working in the vicinity of high-voltage components
Danger to life due to high voltage
The high-voltage system is under high voltage. If high-voltage
components are damaged, there is a risk of severe or fatal injury due to
e ...
Safety precautions for working on vehicles with auxiliary/supplementary
heater
Danger of fire and explosion from auxiliary/supplementary heater
In fire and explosion-endangered areas a spark or the high
temperature of the auxiliary/supplementary heater ca ...
Other materials:
Removing and installing exhaust camshaft oil seal, gearbox end, engine codes
CHPA, CMBA, CPVA, CXSA, CZDA, CZCA, CPVB
Special tools and workshop equipment
required
Assembly tool -T10479 A-
Removing
–
Remove toothed belt pulley for coolant pump
→ ...
Removing and installing cigarette lighter socket
Note
The removal and installation procedure is the same for all
sockets and is therefore described here only for the cigarette
lighter socket.
Caution
If excessive force is exerted ...
Seat belt verification
Removing and installing seat occupied sensor, front passenger side -G128-
Note
The seat occupied sensor is only installed in the front
passenger seat.
Removing
WARNING
...
