Volkswagen Golf Service & Repair Manual: Safety precautions when working in the vicinity of high-voltage components
| Danger to life due to high voltage |
| The high-voltage system is under high voltage. If high-voltage
components are damaged, there is a risk of severe or fatal injury due to
electric shock. |
| – |
Perform visual check of high-voltage components and high-voltage
cables. |
| – |
Never use cutting or forming tools, or any other sharp-edged tools. |
| – |
Never use heat sources such as welding, brazing, soldering, hot air
or thermal bonding equipment. |
Danger to life due to high voltage
The high-voltage system is under high voltage. There is a risk of
severe or fatal injury due to electric shock.
–
Pe ...
Risk of scalding by hot coolant
When the engine is warm, the cooling system is under pressure.
Danger of scalding due to steam and hot coolant.
–
Alway ...
Other materials:
Fitting a bicycle carrier on the mechanically positioned ball coupling
First read and observe the introductory information
and safety warnings The maximum permitted load on a bicycle carrier mounted
on the ball coupling is 80 kg at a distance of 300 mm. This distance
refers to the gap between the centre of gravity of the bicycle carrier (complete
with bicycle ...
Recycling and refuse law
Note
The laws and regulations listed below are valid in the
Federal Republic of Germany. Other or additional laws and
regulations may apply in other countries.
Sources in other countries may be obtained from the
...
Test prerequisites
Radiator and condenser must be clean (clean them if
necessary).
The V-belt for air conditioner compressor and alternator is
correctly tensioned.
All air ducts, covers and seals are OK and properly
...
© 2016-2025 Copyright www.vwgolf.org
Safety precautions when working on high-voltage system
Safety precautions when working on the cooling system