Volkswagen Golf Service & Repair Manual: Exhaust pipes, silencers
- Vehicles with torsion beam axle
- Vehicles with multilink suspension
- Vehicles with torsion beam axle
- Vehicles with multilink suspension
- Vehicles with torsion beam axle
- Vehicles with multilink suspension
- Aligning exhaust system free of tension
- Checking exhaust system for leaks
Exhaus system
...
Vehicles with torsion beam axle
1 -
Rubber mounting
Renew if damaged
2 -
Bolt
20 Nm
3 -
Mounting
...
Other materials:
Removing and installing rear shelf support
Note
Removal and installation are described for the left vehicle
side. Follow same instructions for the right side as
appropriate.
Special tools and workshop equipment
required
...
Removing and installing tank pressure sensor -G400
Removing
Note
The tank pressure sensor -G400- is located in the pressure
regulating valve on the activated charcoal filter
→ Chapter.
–
Remove activated charcoal filter
→ ...
Conicity
Conicity is caused by a slight offset of the tread and/or
the belt (amounting to a few tenths of a millimetre) relative to
the geometric centre of the tyre. Taper is not visible and
cannot be measured with equipment available in the workshop.
& ...
