High Voltage Components
NOTE: Plaid version not shown.
WARNING: The high voltage system has no user serviceable parts. Do not disassemble, remove or replace high voltage components, cables or connectors. High voltage cables are typically colored orange for easy identification.
WARNING: Read and follow all instructions provided on the labels that are attached to Model X. These labels are there for your safety.
WARNING: In the unlikely event that a fire occurs, immediately contact your local fire emergency responders.
Charging Equipment
Charging equipment designed specifically to charge your Model X is available from Tesla. A Tesla Wall Connector, which installs in your parking space, is the fastest way to charge Model X for daily use.
Model X can also be charged using a Mobile Connector and the appropriate adapter(s) that allows you to plug into most commonly used power outlets. When using the Mobile Connector, first plug the Mobile Connector into the power outlet, attach the adapter (if needed), and then plug in Model X. Mobile Connectors and/or additional adapters can be purchased from Tesla stores or online at www.tesla.com.
Tesla offers adapters (for example, J1772, CHAdeMO, and Combined Charging System (CCS) ) to allow you to plug into the most commonly used public charging stations in your region. Open the charge port door using the touchscreen (see Charging Instructions), plug the adapter into the charging port on Model X, and then connect the station's charging connector to the adapter. For information on the charging equipment available for your region, go to www.tesla.com, choose your region, and then view the available charging options.
More details on public charging station adapters is available at https://www.tesla.com/chademo.
Assembly overview - side trim panel
Note
The illustration shows the side trim panel on the left side. The
right-hand side is similar (mirror image of left-hand side).
1 -
Side trim panel
Removing and installing
→ Chapter
2 -
Clip
...
Driving out of a parking space with the Park Assist system (only parking spaces
parallel to side of road)
First read and observe the introductory information
and safety warnings Getting out of a parking space
Start the engine.
Press the button. An indicator lamp
lights up in the button when the function is switched on.
Press the turn signal lever for the side of the s ...
Removing automatic distance control unit from and installing on retaining
plate, variant 2
Note
If the automatic distance control unit -J428- is renewed,
start the respective function → Vehicle
diagnostic tester.
Special tools and workshop equipment
required
...