Fixing position of subframe
Assembly overview - suspension strut, upper suspension linkSecondary locking element
The secondary locking mechanism is a housing catch (second
line locking mechanism) that secures all the wires in one
contact housing. If a secondary locking mechanism is fitted to a
contact housing, this must always be opened or removed using the
appropr ...
Vehicles with torsion beam axle
The connecting pipe can be cut through at the cutting point
in order to renew the centre and rear silencers separately.
Cutting point is marked by an indentation on circumference
of exhaust pipe.
Special tools and ...
Assembly overview - brake pedal, RHD vehicles
Note
The handbrake pedal travel must not be restricted by additional
floor coverings.
Do not lubricate or grease the pivot pin. The pivot pin must remain
dry.
1 -
Bolt
20 Nm
2 -
...