Removing and installing decoupler pulley with freewheel
General description
There are different versions of decoupler pulleys with
freewheel.
Before removing the decoupler pulley with freewheel, it must
be determined which special tool must be used.
...
Repairs to CAN bus wiring
An unshielded two-wire line -1-
and -2- with a cross section of
0.35 mm2 or 0.5 mm2
is used for CAN bus wiring.
The colour codes of the CAN bus wiring can be gleaned from
the following table:
  ...
Removing and installing air intake duct
Note
The illustration shows a left-hand drive vehicle. The
removal and installation procedure is identical for both
versions.
Removing
–
Remove dash pa ...