Volkswagen Golf Service & Repair Manual: Assembly overview - standard wheel

Volkswagen Golf Service & Repair Manual / Wheels and Tyres Guide - General Information / Overview of components / Assembly overview - standard wheel

Assembly overview - standard wheel

1 -

Wheel

Fitting wheels → Chapter

2 -	Wheel bolts

Different versions → Chapter

3 -

Tyres

→ Chapter „Information on tyres“

4 -	Valve/tyre pressure sensor

Always renew valve

Use only correct valves as specified in → Electronic Parts Catalogue “ETKA”

→ Chapter „Tyre pressure sensor“

5 -

Rim

Observe fitting instructions → Chapter

→ Chapter „Information on wheel rims“

→ Chapter „Structure of wheel rim“

6 -	Adhesive balancing weights

Not more than 60 g permitted per wheel rim flange

Remove dirt and grease from wheel rim at bonding point

Pull off backing foil

Bond on balancing weights at surfaces provided for this purpose

7 -	Anti-theft wheel bolt

Observe the fitting instructions → Chapter

Handling → Fig.

8 -	Adapter for anti-theft wheel bolt

Fit onto wheel bolt → Fig.

9 -	Cap for anti-theft wheel bolts

10 -	Caps for wheel bolts

11 -	Wheel bolts

Specified torque: → Running gear, axles, steering; Rep. gr.44

Note

Make sure the correct wheel bolts are fitted → Electronic Parts Catalogue “ETKA”

Observe fitting instructions → Chapter

12 -	Wheel hub cover

Removing and installing → Chapter

Overview of components

...

Assembly overview - wheel, PAX

1 - Wheel Fitting wheels → Chapter 2 - Wheel bolts Different versions → Chapter ...

Other materials:

Fitting the front towing eye
Fig. 246 In the right-hand side of the front bumper: removing the cover Fig. 247 Front bumper, right-hand side: screwing in the towing eye First read and observe the introductory information and safety warningsThe towing eye is screwed into a threaded hole behind a cover on the right of ...

Rear axle
Overview - rear axle, torsion beam axle I - → Chapter „Axle beam“ II - → Chapter „Suspension strut, shock absorber, spring“ III - → Chapter „Wheel bearing assembly, trailing a ...

Removing engine
Special tools and workshop equipment required Removal lever -80 - 200- Extension -2024 A /1- of lifting tackle -2024 A- Engine and gearbox jack -V.A.G 1383 A- or -VAS 6931- Engine bracket -T10497- Drip ...