Changing a wheel
Fig. 226 Changing a wheel: removing the
wheel bolts with the screwdriver handle
First read and observe the introductory information
and safety warningsRemoving the wheel
Read the checklist.
Loosen the wheel bolts.
Jack up the vehicle.
Using the hexagonal socket in the scr ...
Bringing air conditioning system into service after charging
Note
If the air conditioner compressor was removed, the V-belt
pulley /freewheel must be turned by hand approx. 10 times prior
to initial operation. This prevents any damage occurring from a
fluid hammer in the air conditioner compressor when th ...
Repairing run-flat tyres, PAX
General information
It is not always necessary to renew a tyre after it has lost
pressure and then been run in an uninflated condition.
Note
The affected tyre should be removed and checked for damage
by qu ...