Volkswagen Golf Service & Repair Manual: Run-flat tyres, PAX, wheel alignment

Volkswagen Golf Service & Repair Manual / Wheels and Tyres Guide - General Information / Information on tyres / Run-flat tyres, PAX / Run-flat tyres, PAX, wheel alignment

The procedure for adjusting the wheel alignment on vehicles with run-flat tyres (PAX) is the same as for vehicles with standard tyres.

Generally, the same measuring heads and fasteners for standard tyres with rim protector can be used on PAX wheels. (Fit to the inner side, secure to tyre tread).

Run-flat tyres, PAX, wheel alignment

Run-flat tyres, PAX, inflating tyre

Observe the following important points when inflating the tyre: – Only inflate after fitting the tyre with valve core installed. ...

Repairing run-flat tyres, PAX

General information It is not always necessary to renew a tyre after it has lost pressure and then been run in an uninflated condition. ...

Other materials:

Removing and installing starter, vehicles with double clutch gearbox (DQ250-6F)
Special tools and workshop equipment required Torque wrench -V.A.G 1331- Torque wrench -V.A.G 1332- Remov ...

Removing and installing trim for backrest release mechanism
Removing – Pull operating lever -1- upwards -arrow A-. – Insert flat-bladed screwdriver between trim and operating lever as shown in illustration. – Releas ...

Removing and installing camshaft control valve 1 -N205- and exhaust camshaft control valve 1 -N318-
Note On engines with codes CMBA, CPVA, CXSA, CZCA and CPVB, only camshaft control valve 1 -N205- is installed. Removing Inlet camshaft control valve 1 -N205- – Disconnect ele ...