Assembly overview - dash panel central tube
Note
If electrical wires are disconnected or removed and installed, it
is useful to make corresponding drawings or photos. This guarantees that
everything is re-installed in its original position.
1 -
Securing bracket
Welded to body ...
Removing and installing door inner seal
During production, a sealant is applied to the door inner
seals, which are then placed on the door flange and rolled on.
Note
When removing the seal, the sealant is distributed across
the inside of the seal. The sid ...
Fitting the rear towing eye
Fig. 248 Rear bumper on the right-hand
side: removing the cover
Fig. 249 Rear bumper on the right-hand
side: screwing in the towing eye
First read and observe the introductory information
and safety warningsThe towing eye is screwed into a threaded hole behind
a cover on the right of the ...