First read and observe the introductory information and safety warnings
The roll-back function for the electric windows can reduce the risk of injuries when the windows are closing . If the one-touch closing function for a window does not work because it is stiff or is being obstructed, the window will automatically open again.
Closing the window without the roll-back function
WARNING
Closing the electric windows without the roll-back function can lead to severe injuries.The roll-back function is also activated if the windows are closed using the vehicle key for convenience closing .
Spare wheel or temporary spare wheel
Fig. 203 In the luggage compartment: handwheel
for securing the spare wheel
First read and observe the introductory information
and safety warnings Removing the spare wheel
Open the tailgate and lift up the luggage compartment floor until it is
held in position by the side restraints ...
Removing and installing B-pillar trim on rear door
Note
Removal and installation are described only for the left side.
Removal and installation of the right side are similar.
Removing
–
Run door window down to bottom position.
–
Pull window channel -3- in area ...
Removing and installing humidity sender for air conditioning system -G260-
The humidity sender for air conditioning system -G260- and
the light/rain sensor -G397- form one component and are
installed depending on vehicle equipment.
–
Removal and installation procedure is described in
→ E ...