Volkswagen Golf Service & Repair Manual: Checking pressures in refrigerant circuit (using air conditioner service
station)
 Note
| Check the cooling performance. The air conditioning system
is operating correctly if the air emerging from the vent on the
dashboard is at a temperature of 7oC
or less. |
| Set the Climatronic to: “LO”. |
| Set the air conditioning system: “AC” on; “max”; “cold”. |
| Connections with valve and service connections for measuring
and testing. |
|
|
|
Radiator and condenser must be clean (clean them if
necessary).
The heat insulation on expansion valve is OK and properly
installed. See ...
Other materials:
Removing and installing Bowden cable
Removing
–
Open bonnet.
–
Remove release lever
→ Chapter.
–
Remove Bowden cable -3- from mounting
bracket -5--arrow a-.
– ...
Overview of the menu structure
First read and observe the introductory information
and safety warnings The following menu structure shows how the Volkswagen
information system menus in the instrument cluster display are structured. The size
and layout of the Volkswagen information system menu depends on the vehicle electr ...
Assembly overview - rear vehicle level sender, torsion beam axle
Note
The rear left vehicle level sender -G76- is only available as a
replacement part complete with coupling rod and upper and lower
retaining plates.
1 -
Electrical connector
2 -
Bolt
5 Nm
...
© 2016-2026 Copyright www.vwgolf.org
Test prerequisites