Volkswagen Golf Service & Repair Manual: Notes on safety

Volkswagen Golf Service & Repair Manual / Brake system (hybrid) / Technical data / Notes on safety

Safety precautions during a road test using test and measuring equipment

Observe the following if test and measuring equipment is required during a road test:

Risk of accidents due to distraction and inadequate securing of test and measuring equipment.

Danger as a result of activation of front passenger airbag in event of an accident.

During a road test, you must always secure test and measuring equipment on the back seat.

These devices may be operated only by a passenger while the vehicle is in motion.

Rear brakes

The type of brake system installed in the vehicle is indicated among other things by the corresponding PR number on the vehicle data sticker. T ...

Technical data

Brake master cylinder and brake servo Brake master cylinder Diameter in mm 23.81 Brake ...

Other materials:

Assembly overview - Lambda probe
Note New lambda probes are coated with an assembly paste. This paste must not get into the slots on the Lambda probe body. In the case of a used Lambda probe grease only the thread with high-temperature paste. This p ...

Assembly overview - cover and padding for bench seat
1 - Seat frame 2 - Seat padding Allocation → Electronic Parts Catalogue Removing and installing seat cover and seat padding → Chapter Separating seat cover from seat padding → Chapter ...

Main beam assist
First read and observe the introductory information and safety warnings Main beam assist (Light Assist) Within the limits of the system, the main beam assist automatically switches the main beam on at speeds of over approximately 60 km/h (37 mph), depending on environmental and traffic con ...