Assembly overview - fuel rail with injectors
1 -
Fuel pressure sender -G247-
Checking
→ Chapter
Removing and installing
→ Chapter
Lubricate taper lightly with clean engine oil; do not lubricate
thread
22 Nm
...
Assembly overview - accelerator module
1 -
Bolt
6 Nm
2 -
Electrical connector
Make sure it is engaged properly; pull to check that plug-in
connector is correctly engaged
3 -
Accelerator pedal module -GX2-
...
Removing and installing actuator
Removing
–
Removing tank flap unit
→ Chapter
–
To get access to connector, remove right luggage compartment side
trim
→ General body repairs, interior; Rep. gr.70
–
Separate ...