1 - | LED module for daytime running light and side light |
Left LED module for daytime running light and side light -L176- |
Right LED module for daytime running light and side light -L177- |
Removing and installing → Chapter |
2 - | Bolt |
Qty. 8 |
2 Nm |
3 - | Breather valve |
4 - | Bolt |
Qty. 3 |
1.4 Nm |
5 - | LED light with heat sink |
Rain sensor
Fig. 89 Windscreen wiper lever: setting
the rain sensor ①
Fig. 90 Sensitive surface of the rain sensor
First read and observe the introductory information
and safety warnings When the rain sensor is activated, it automatically controls
the frequency of the wiper intervals, depending o ...
Removing and installing rear axle, multi-link suspension, front-wheel drive,
except for e-Golf and Golf GTE
Special tools and workshop equipment required
Torque wrench -V.A.G 1332-
Engine and gearbox jack -V.A.G 1383 A-
Tensioning strap -T10038-
Locating pins -T10096-
Removing subframe with ...
Safety precautions when working in the vicinity of high-voltage components
Danger to life due to high voltage
The high-voltage system is under high voltage. If high-voltage
components are damaged, there is a risk of severe or fatal injury due to
electric shock.
–
Perform visual check of high-voltage components and high-v ...