Volkswagen Golf Service & Repair Manual: Wiring harness repair set -VAS 1978A-

Volkswagen Golf Service & Repair Manual / Electrical system, general information / Wiring / Wiring harness and connector repairs / Wiring harness repair set -VAS 1978A-

The new wiring harness repair set -VAS 1978A- allows optimal repair quality to be achieved in the area of vehicle electrics. Using the new pliers, repairs to connectors and wiring open circuits can be carried out. To do this, complete repair wire sections with contacts already crimped on are used and joined to the vehicle's own wiring harness with the aid of four different types of crimp connectors. A new set of crimping pliers with head adapters and a hot air blower for shrinking the crimp connectors make a perfect electrical connection.

Note

Additional information:

→ Operating instructions Wiring harness repair setVAS 1978A

Wiring harness repair set -VAS 1978A-

Upgrade kit -VAS 1978/50-

Upgrade kit -VAS 1978/50- is required to bring the “old”wiring harness repair set -VAS 1978- up to the latest standard of wiring harness repair set -VAS 1978A-. T ...

Release tool set -VAS 1978/35

Release tool set -VAS 1978/35- serves as a means of releasing various primary and secondary locking devices in Group vehicles. The set comprises 26 different tools wh ...

Other materials:

Run-flat tyres, structure of a PAX tyre
Run-flat tyres (PAX) are specially developed tyres that differ from conventional tyres as follows: PAX tyre with support ring – -I- Pax tyre with regular tyre pressure ...

Saw-tooth wear
Saw-tooth wear is a stepped wear pattern on the individual tread blocks → Fig. that can cause increased tyre noise. The saw tooth is caused by uneven deformation of the tread blocks in the tyre's contact patch. Saw-tooth wear is more pronounce ...

Removing and installing seat trim on sill side, seat of type "ergo Aktiv"
Note Removal and installation are described for the left vehicle side. Follow same instructions for the right side as appropriate. Special tools and workshop equipment required ...