Cleaning seat belts
IntroductionAssembly overview - brake pedal, LHD vehicles
Note
The handbrake pedal travel must not be restricted by
additional floor coverings.
Do not lubricate or grease the pivot pin. The pivot pin must
remain dry.
1&n ...
Assembly overview - drive shaft, constant velocity joint VL107
1 -
Bolt
Renew after removing
Loosening and tightening
→ Chapter
Before fitting, clean the threads in the CV joint using a thread
tap.
200 Nm +180°
2 - ...
Opening and closing the bonnet
Fig. 190 In the footwell on the driver
side: lever for releasing the bonnet
Fig. 191 Release lever for opening the
bonnet above the radiator grille
First read and observe the introductory information
and safety warnings Opening the bonnet
Ensure that the windscreen wiper arms are pos ...