Volkswagen Golf Owners Manual: Wheel bolt caps
Fig. 221 Removing the wheel bolt caps
First read and observe the introductory information
and safety warnings- Take the wire hook from the vehicle toolkit.
- Insert the hook through the opening in the cap and pull off in the direction of the arrow.
The caps protect the wheel bolts and must be replaced after changing the tyre.
The anti-theft wheel bolt has a separate cap. It only fits onto the anti-theft wheel bolts and not onto conventional wheel bolts.
Wheel cover
Fig. 220 Removing the wheel covers
First read and observe the introductory information
and safety warningsRemoving the wheel covers
Take the box spanner and wire hook from the vehicle toolkit. ...
Changing a wheel
...
Other materials:
Introduction
This chapter contains information on the following subjects:
→ Warning lamp
→ Frontal collisions and the laws of physics
→ What happens to vehicle occupants who have not fastened their seat belts
→ Seat belt protection
→ Using seat bel ...
Removing and installing engine control unit -J623- (with metal locking
plate)
Special tools and workshop equipment
required
Hot air blower -VAS 1978/14A--1-
with nozzle -2- from wiring harness
repair set -VAS 1978 B-
Small grinder (commerci ...
Removing and installing rear underbody cover – e-Golf
Removing
–
Remove bolts -2-.
–
Unscrew nuts -3-.
–
Remove underbody cover -1-.
Installing
Install analogously in reverse order, but note the following:
Specified torque
...