Setting vehicle to initial position for wheel alignment
If measured values are outside specified tolerances, this
may be because the vehicle is inclined.
Right-hand drive vehicles or e.g. vehicles with an automatic
gearbox may lean to one side slightly.
This is due to the ins ...
Checking securing parts and anchorage points after an accident
Latch plate deformed (stretched)
Height adjustment does not function.
Anchorage points (seat, pillars, underbody) distorted or
thread damaged
If damage is determine ...
Checking electromechanical parking brake, vehicles with front-wheel drive
Activate »TЬV mode«:
Seat belt is fitted
Rear axle on single-axle roller dynamometer
Ignition remains switched on
Auto-hold is switched off
...