Volkswagen Golf Owners Manual: Vents

Volkswagen Golf Owners Manual / While driving / Air conditioning system / Heating, ventilating, cooling / Vents

Fig. 184 In the dash panel: vents

First read and observe the introductory information and safety warnings

Vents

The vents should be left open to ensure that the vehicle interior is sufficiently heated, ventilated and cooled.

Turn the relevant thumb wheel (magnified view) in the required direction to open and close the vents. The vent is closed when the thumb wheel is in position .

Adjust the direction of the airflow by moving the grille.

Additional vents can be found in the instrument panel , in the footwells and in the rear area of the vehicle interior.

NOTICE

Do not place any food, medicine or any other heat-sensitive items in front of the vents. Heat-sensitive food, medicine and other items could be either damaged or rendered useless.

The air from the vents flows through the entire passenger compartment and leaves the vehicle via the air outlet slots in the rear of the luggage compartment. The slots must not be covered by items of clothing or other items.

Information on the air conditioning system

First read and observe the introductory information and safety warnings The cooling system for the vehicle interior only works when the engine is running and the blower is switched on. The air ...

Air recirculation mode

First read and observe the introductory information and safety warnings General notes There are different types of air recirculation mode: Man ...

Other materials:

Wheel alignment procedure
Always adhere to the following procedure! Note The vehicle must always be in unladen condition when measuring wheel alignment → Chapter. – T ...

Dismantling and assembling drive shaft, triple roller joint AAR3300i
Special tools and workshop equipment required Thrust plate -VW 401- Thrust plate -VW 402- Press tool -VW 408 A- Press tool -VW 411- Tube -VW 416 B- Th ...

Fixing position of subframe, multi-link suspension, front-wheel drive, Golf GTE
Special tools and workshop equipment required Locating pins -T10096- Engine and gearbox jack -VAS 6931- I ...