Volkswagen Golf Service & Repair Manual: Safety precautions when working in the vicinity of high-voltage components
| Danger to life due to high voltage |
| The high-voltage system is under high voltage. If high-voltage
components are damaged, there is a risk of severe or fatal injury due to
electric shock. |
| – |
Perform visual check of high-voltage components and high-voltage
cables. |
| – |
Never use cutting or forming tools, or any other sharp-edged tools. |
| – |
Never use heat sources such as welding, brazing, soldering, hot air
or thermal bonding equipment. |
Danger to life due to high voltage
The high-voltage system is under high voltage. There is a risk of
severe or fatal injury due to electric shock.
–
Pe ...
Other materials:
Repairing shock absorber
1 -
Shock absorber
Removing and installing
→ Chapter
Defective shock absorbers must always be degassed and drained before
disposal
→ Chapter
Checking shock absorber following removal
& ...
Assembly overview - centre armrest
1 -
Intermediate padding
Allocation
→ Electronic Parts Catalogue
Removing and installing
→ Chapter
2 -
Centre armrest
Removing and installing
→ Chapter
3 -
Lid
...
Assembly overview - speed sensor on rear axle, all-wheel drive
1 -
ABS speed sensor
Clean inside surface of hole before inserting sensor
Coat inside surface with high-temperature paste -G 052 112 A3-
Removing and installing
→ Chapter
2 -
Bolt
...
© 2016-2024 Copyright www.vwgolf.org
Safety precautions when working on high-voltage system
General notes