Volkswagen Golf Service & Repair Manual: Safety instructions
- Safety precautions for working on vehicles with auxiliary heater
- Safety precautions for working on vehicles with Start/Stop system
- Safety precautions when working on the cooling system
- Safety precautions when using testers and measuring instruments during a road test
- Safety precautions when working on high-voltage system
- Safety precautions when working in the vicinity of high-voltage components
Technical data
...
Safety precautions for working on vehicles with auxiliary heater
Danger of fire and explosion from auxiliary/supplementary heater
In fire and explosion-endangered areas a spark or the high
temperature of the auxiliary/supplementary heater ca ...
Other materials:
Checking condensation drainage
Checking
–
Remove right centre console trim in footwell
→ General body repairs, interior; Rep. gr.68.
–
Carefully fold back floor covering in area of condensation
drain hose so ...
Assembly overview - front three-point seat belt, 4-door model and estate
1 -
Bolt
If removed due to an accident with seat belt fastened, renew bolt.
40 Nm
2 -
Belt end fitting
Removing and installing
→ Chapter
3 -
Bolts
Qty. 2
4.5 Nm
...
Conicity
Conicity is caused by a slight offset of the tread and/or
the belt (amounting to a few tenths of a millimetre) relative to
the geometric centre of the tyre. Taper is not visible and
cannot be measured with equipment available in the workshop.
& ...
