Volkswagen Golf Service & Repair Manual: Removing and installing wiper blade

Volkswagen Golf Service & Repair Manual / Electrical system / Windscreen wipe/ wash system / Rear window wiper system / Removing and installing wiper blade

Caution

Risk of damage to the wiper blade.

Joint-free wipers are very flexible. To lift the wiper blades off the rear window, touch them only in the area in which the wiper blades are attached to the wipers.

Removing

–	Lift wiper arm off the rear window.

–	Swivel wiper blade in direction of arrow -A- out of wiper arm.

–	Press release button -2-.

–	Pull wiper blade on wiper blade fastener -1- in direction of arrow -B- out of wiper arm.

Installing

Install in the reverse order of removal, observing the following:

Note

The wiper blade should be heard to engage in the wiper arm.

Removing and installing wiper blade

Assembly overview - rear window wiper system

1 - Cap 2 - Nut Specified torque: 12 Nm 3 - Wiper arm with joint-free wiper Removing ...

Removing and installing wiper arm

Special tools and workshop equipment required Puller -T10369- ...

Other materials:

Removing and installing Denso belt pulley
Note The pulley is sensitive to impact and should therefore be treated with extreme care. If the belt pulley overload protection has deployed, check freedom of movement of air conditioner compressor before rene ...

Checking operation and power supply of fuel pump
Special tools and workshop equipment required Removal wedge -3409- Multimeter e.g. hand-held multimeter -V.A.G 1526E- ...

Removing and installing intermittent wiper switch -E22-
Note The turn signal switch -E2-, cruise control system switch -E45- and intermittent wiper switch -E22- are combined to form the steering column combination switch -E595-. These switches cannot be separated. ...