Volkswagen Golf Service & Repair Manual: Overview of fitting locations – control units, rear
| 1 - |
Remote control receiver for auxiliary coolant heater -R149- |
| Removing and installing remote control receiver for auxiliary
coolant heater -R149-
→ Heating, Air conditioning; Rep. gr.82 |
| 2 - |
Two-way signal amplifier for mobile telephone/data services -J984- |
| Assembly overview
→ Electrical system; Rep. gr.91 |
| 3 - |
Engine sound generator control unit -J943- |
| Removing and installing
→ Chapter „Removing and installing engine sound generator control unit
-J943-, vehicles with active sound, Golf GTD“ |
| 5 - |
Electronically controlled damping control unit -J250- |
| Assembly overview
→ Running gear, axles, steering; Rep. gr.43 |
| 6 - |
Trailer detector control unit -J345- |
| → Chapter „Assembly overview - towing bracket socket“ |
1 -
Headlight range control unit -J431-/control unit for cornering light
and headlight range control -J745-
Assembly overview
→ Chapter
...
1 -
Control unit
Versions with parking aid:
Parking aid control unit -J446-
Assembly overview
→ Chapter
...
Other materials:
Identification plates
Identification plate with capacities for refrigerant R134a
and refrigerant oil
1 -
Name of refrigerant
2 -
Refrigerant capacity
3 -
Designation of refriger ...
Removing and installing lumbar support adjustment switch -E176-/-E177-
Note
Removal and installation are described for the left
vehicle side. Follow same instructions for the right side as
appropriate.
Removing
–
Remove se ...
Assembly overview - sump and oil pump
Note
Metal shavings or a large quantity of small metal particles found
during engine repair could indicate that the crankshaft bearings or
conrod bearings are damaged. To avoid any subsequent damage, the
following work must be carried out following the repair: Caref ...
© 2016-2026 Copyright www.vwgolf.org
