Fig. 164 Left-hand side of the steering column: switch and buttons for operating the speed limiter
Fig. 165 Left-hand side of the multifunction steering wheel: buttons for operating the speed limiter
Function | Switch position, switch operation on the turn signal lever or button on the multifunction steering wheel | Action |
---|---|---|
Switching on the speed limiter. | Move switch
① on the turn signal lever to position ![]() ![]() ![]() |
The system is switched on. The speed limiter's last set speed is stored. No control yet. |
Press button ② on the turn signal lever, or press the
![]() |
||
Changing between the speed limiter and cruise control system (CCS) or Adaptive Cruise Control (ACC) (when the speed limiter is switched on). | Press button ② on the turn signal lever, or press the
![]() |
This switches between the speed limiter and CCS or ACC. |
Activating the speed limiter. | Press button ③ on the turn signal lever at the area
marked ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
The speed at which the vehicle is currently travelling is stored in the memory as the maximum speed and the speed limiter is activated. |
Switching off the speed limiter regulation temporarily. | Move switch ① on the turn signal lever to position
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Control is switched off temporarily. The speed is stored in the memory. |
Switching off speed limiter regulation temporarily using the kickdown function. | Fully depress the accelerator beyond resistance (e.g. for overtaking). The speed limiter is switched off temporarily when the stored speed is exceeded. | Control is switched off temporarily. The speed is stored in the memory. Speed limiter regulation switches on again automatically as soon as the vehicle falls below the originally stored speed. |
Resuming speed limiter control. | Press button ③ on the turn signal lever at the area
marked ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
The speed is limited to the stored speed as soon as the speed at which the vehicle is currently travelling falls below the stored maximum speed. |
Increasing the stored speed. | Press button ③ in the area marked
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
The speed is limited to the stored value. |
Press the ![]() |
||
Press button ③ on the turn signal lever in the area
marked ![]() ![]() ![]() ![]() ![]() ![]() |
||
Reducing the stored speed. | Press button ③ on the turn signal lever in the area
marked ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
The speed is limited to the stored value. |
Press the ![]() |
||
Press button ③ on the turn signal lever in the area
marked ![]() ![]() ![]() ![]() ![]() ![]() |
||
Switching off the speed limiter. | Move switch ① to the
![]() ![]() ![]() OR: when regulation is active, briefly press the ![]() OR: in any operating mode, press and hold the ![]() |
The system is switched off. The stored speed remains stored in the memory. |
The mph figures given in brackets in the table relate exclusively to instrument clusters with mile readings.
Driving downhill with the speed limiter
When the speed limiter's stored set speed is exceeded when travelling downhill,
the warning and indicator lamp will begin to flash
after a short time, and an acoustic warning may also be sounded. Apply the foot
brake to slow the vehicle down, and change down a gear as required.
Deactivating temporarily
If the speed limiter regulator is temporarily deactivated, e.g. when overtaking,
move switch on the turn signal lever to position
or press button
or
in
the multifunction steering wheel .
After overtaking, the speed limiter can be activated with the previous set speed
by pressing the button on the turn signal lever in the
area or by pressing the
button on the multifunction steering wheel .
Temporary deactivation when the kickdown function is activated
Speed limiter regulation is deactivated temporarily when the accelerator is fully depressed (kickdown) and the stored speed is deliberately exceeded by the driver.
A one-off acoustic signal confirms the deactivation. The warning and indicator
lamp flashes during deactivation.
Speed limiter regulation is reactivated when the accelerator is no longer fully
depressed and the vehicle speed has fallen below the stored speed. The indicator
lamp lights up continuously.
Automatic switch-off
Speed limiter regulation is automatically switched off:
NOTICE
Balancing wheel, balancing wheel with finish balancer
Note
Before working with a finish balancer, the mechanic needs to
have been instructed by the manufacturer of the balancer.
To balance the wheels, set the wheels of the driven axle on
the sensor platforms. On front-w ...
Removing and installing camshaft control valve 1 -N205- and exhaust camshaft
control valve 1 -N318-
Note
On engines with codes CMBA, CPVA, CXSA, CZCA and CPVB, only
camshaft control valve 1 -N205- is installed.
Removing
Inlet camshaft control valve 1 -N205-
–
Disconnect ele ...
Checklist
The following actions must always be carried out in the given order
in preparation for changing the wheel :
In the event of a flat tyre, park your
vehicle on a firm and level surface at a safe distance from the flow of traffic.
Switch on the electronic parking brake
Braking, st ...