Volkswagen Golf Service & Repair Manual: Connectors

Volkswagen Golf Service & Repair Manual / Electrical system / Wiring / Connectors

Repairs to wiring harnesses and connectors

Note

All instructions and notes regarding this chapter are available under → Electrical System, General Information; Rep. gr.97.

Repairing connector housings and electrical connectors

Note

All instructions and notes regarding this chapter are available under → Electrical System, General Information; Rep. gr.97.

Releasing and dismantling connector housings

Note

All instructions and notes regarding this chapter are available under → Electrical System, General Information; Rep. gr.97.

Repairing aerial cables

Note

All instructions and notes regarding this chapter are available under → Electrical System, General Information; Rep. gr.97.

Optical fibre conductor

Note

All instructions and notes regarding this chapter are available under → Electrical System, General Information; Rep. gr.97.

Vehicle diagnostic, testing and information systems

Note

All instructions and notes regarding this chapter are available under → Electrical System, General Information; Rep. gr.97.

Removing and installing engine sound generator control unit -J943-, vehicles with active sound, Golf GTD

Removing – Remove C-pillar trim → General body repairs, interior; Rep. gr.70. ...

Communication

...

Other materials:

Digital sound package control unit -J525-, vehicles with Volkswagen sound system
Special tools and workshop equipment required Torque wrench -V.A.G 1783- Protective cap for wiring harness connector -VAS 6223/9 ...

Assembly overview – Blind Spot Monitor (Blind Spot Detection)
1 - Blind Spot Monitor warning lamp in left exterior mirror -K303- Removing and installing → Chapter 2 - Blind Spot Monitor warning lamp in right exterior mirror -K304- Removing and installing ...

Warning and indicator lamps
First read and observe the introductory information and safety warnings Lit up Possible cause Solution Gearbox fault. Do not drive on! Move the selector lever to position P and leave the gearbox to cool down. If ...