
Fig. 207 In the middle of the dash panel: hazard warning light button
First read and observe the introductory information
and safety warningsObserve any legislation concerning the safety of broken-down vehicles. For example, many countries stipulate that you have to switch on the hazard warning lights and wear a high-visibility waistcoat .
Introduction
ChecklistRemoving and installing subwoofer -R211-
The subwoofer -R211- is located in the spare wheel well.
Removing
–
Switch off ignition and all electrical consumers, and remove
ignition key.
–
Take out luggage compartment f ...
Emptying fuel tank if it is less than 3/4
full
Special tools and workshop equipment required
Removal wedge -3409-
Wrench -T10202-
Torque wrench -V.A.G 1332-
Fuel extractor -VAS 5190-
Fuel extractor -VAS 5190 A- for E 85 fuel (not shown).
&nb ...
Removing and installing refrigerant circuit pressure sender -G805
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331-
Commercially available twelve-point socket bit, extra long,
1/2", 24 mm (dimensions: 32x82 ...