Volkswagen Golf Service & Repair Manual: Additional information
| Technical Service Handbook with measures for rectifying
latest malfunctions. |
| Workshop manual for service work specific to model
→ Heating, air conditioning; Rep. gr.87. |
| → Current
flow diagrams, Electrical fault finding and Fitting locations |
| Self-study programme No. 208 is no longer up-to-date in some
sections. E.g. the statement “The receiver must be renewed each
time the refrigerant circuit is opened”. The following
conditions apply
→ Anchor |
| Video programs for staff training. |
| Catalogue of special tools / workshop testing. |
| Service Organisation Volume 1 Additional equipment. |
| Workshop manual for air conditioning system with R12
refrigerant (for vehicles that were manufactured up to model
year 1993). This workshop manual is only available as a hard
copy. |
|
This repair manual is intended to provide technicians and
fitters with the basic knowledge required for performing trained
work on these systems.
&nb ...
Other materials:
Shifting Using the Touchscreen
When you press the brake pedal when parked, the drive
mode strip displays on one side of the touchscreen. Use
the drive mode strip to shift Model X: swipe up for Drive,
swipe down for Reverse or touch the P for Park. The
drive mode strip is always available on the touchscreen
when you touch Con ...
Valve dimensions
Note
Inlet and exhaust valves must not be reworked. Only
lapping-in is permitted.
Dimension
Inlet
valve
Exhaust
valve
Diameter a
...
Conicity
Conicity is caused by a slight offset of the tread and/or
the belt (amounting to a few tenths of a millimetre) relative to
the geometric centre of the tyre. Taper is not visible and
cannot be measured with equipment available in the workshop.
& ...
© 2016-2023 Copyright www.vwgolf.org
Introduction