This chapter contains information on the following subjects:
→ Vehicle settings menu
Additional information and warnings:
General information on operating the unit
The following section contains information on the settings that can be adjusted in the Vehicle settings menu. Basic information on operating the infotainment system and on warning and safety instructions are contained in a separate manual ⇒ BookletRadio, or ⇒ BookletNavigation system, .
Systems settings and display of vehicle information
After pressing the
infotainment
button you can touch the corresponding function button to display information or
adjust settings, e.g. you can check the current status of the start/stop system
in the Vehicle status menu.

WARNING
After starting the engine with a discharged vehicle battery, or after the battery has been changed, system settings (time, date, personal convenience settings and programming) may have been changed or deleted. Check and correct the settings as necessary once the vehicle battery has been sufficiently charged.
Vehicle settings menuDisplays
Fig. 172 In the instrument cluster display:
distance warning display
Fig. 173 The display in the instrument
cluster: advance warning display
First read and observe the introductory information
and safety warnings Distance warning
If the safe distance to the vehicle in front drops below ...
Removing and installing door
Special tools and workshop equipment
required
Door alignment tool -3320-
Universal joint for 3320 -3320/1
Bit for 3320 -3320/2-
Bit for 3320 -3320/3-
Torque wrench -V.A.G 1331-
Socket -3410-
Setting gauge -3371-
...
Removing and installing suction-jet pump
On vehicles with four-wheel drive the fuel tank is divided
into a left and a right chamber. A suction-jet pump
-2- is used for delivering fuel
from the left fuel tank chamber to the baffle housing of the
fuel delivery unit -1- on the
right.
...