Volkswagen Golf Owners Manual: Menu and system settings (SETUP)
Introduction
This chapter contains information on the following subjects:
→ Vehicle settings menu
Additional information and warnings:
Instruments
Volkswagen information syste ...
Other materials:
Removing and installing toothed belt, engine codes CHPA, CZDA
Special tools and workshop equipment required
Torque wrench -VAS 6583-
Counterhold -T10172- with adapter -T10172/1-
Locking pin -T10340-
Counterhold -T10475-
Special wrench, 30 mm -T10499-
...
Assembly overview - sump and oil pump
Note
Metal shavings or a large quantity of small metal particles found
during engine repair could indicate that the crankshaft bearings or
conrod bearings are damaged. To avoid any subsequent damage, the
following work must be carried out following the repair: Caref ...
Sanding
Avoid sanding through to substrate
–
It is recommended to carefully sand the marked area by hand
to avoid “sanding through” the cathodic dip primer.
Seam seals
S ...
