
Fig. 187 In the instrument cluster: fuel gauge for petrol and diesel
First read and observe the introductory information
and safety warnings | Lit up |
Needle position |
Possible cause | Solution |
|---|---|---|---|
|
Red marking (arrow) | Fuel tank nearly empty. Reserve quantity is being used . |
Fill the tank as soon as possible . |
|
– | The tank cap is not closed properly. | Stop the vehicle and close the tank cap properly. |
Several warning and indicator lamps will light up briefly as a functional check when the ignition is switched on. They will switch off after a few seconds.
When the indicator lamp
lights up, the supplementary
heating system and fuel-powered auxiliary heater switch off automatically.

WARNING

NOTICE
The small arrow next to the petrol pump symbol in the display instrument shows you the side of the vehicle on which the tank flap is located.
Introduction
Filling the tank with petrol, diesel or E85Refrigerant circuit seals
Renew seals.
Moisten seals with refrigerant oil before installing.
Ensure proper seating of seals on the pipe or in the groove.
Work in a completely clean environment (the smallest
particles ...
Separating brake pedal from brake servo
Special tools and workshop equipment
required
Release tool -T10159B-
–
Remove footwell cover on driver side
→ General body repairs, interior; Re ...
Wheel change, protecting wheel centring seat against corrosion
Applies to alloy and steel wheels
When changing a wheel, wheel centring seat should be waxed
using wax spray to prevent corrosion between wheel centring seat
and wheel rim
→ Electronic Parts Catalogue “ETKA”.
...