Repair instructions
Contact corrosion
Contact corrosion can occur if unsuitable fastening elements
(screws, bolts, nuts, washers) are used.
For this reason, only connecting elements with a special
surface coating have been fitted.
In addit ...
Removing and installing baffle plate, LHD vehicles
Removing
–
Depending on version, remove plastic bolt or plug
-2- and remove baffle plate
-1-.
Installing
–
Install in reverse order ...
Removing and installing relay and fuse carrier behind dash panel, RHD
vehicles
Removing
–
With ignition switched off, disconnect earth cable from
battery
→ Chapter.
–
Remove dash panel
→ General body repairs, interior; Rep. gr.70.
...