First read and observe the introductory information
and safety warnings
Engine oil consumption can vary from engine to engine and can change during the working life of an engine.
Depending on how you drive and the conditions in which the car is used, oil consumption can be up to 1.0 litre/2,000 km – and is likely to be higher for the first 5,000 km for new vehicles. The engine oil level must therefore be checked at regular intervals, preferably when refuelling and before long journeys.
When the engine is working hard the oil level must be kept within area , for instance during long motorway cruising in summer, trailer towing or climbing mountain passes.
Checklist
Changing engine oilEngine preheating
Fig. 131 The front left of the bumper:
connection for engine preheating ②
First read and observe the introductory information
and safety warnings In engine preheating mode, the engine coolant is heated
slowly using a heating element while the vehicle is stationary. To do so, the cables
...
Welding and soldering on refrigeration systems
Before welding and brazing on vehicles (in the vicinity of
the air conditioning system components), extract the refrigerant
and then purge the system by blowing through with compressed air
and using nitrogen.
The products of decompositio ...
Checking holding pressure, engine code CWVA
Special tools and workshop equipment required
Pressure tester -VAS 6550-
Removal wedge -3409-
Connector cable -VAS 6550/3-3-
Connector cable -VAS 6550/3-4-
Vehicle diagnostic tester
...