Opening and closing the bonnet
IntroductionRemoving and installing front tunnel cross-piece
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331-
Removing
–
If fitted, remove centre underbody panel
→ ...
Undercoated areas, body overview indicating differing coat thicknesses
Note
Undercoating (stone-chipping protection) applied during repair work
must be identical in appearance and thickness to the original
undercoating.
Water drainage holes must remain clear.
All threaded studs and welded nuts with metric ...
Vacuum generation with manual vacuum pump -VAS 6213-
In certain cases, vacuum can be generated with the manual
vacuum pump -VAS 6213- instead of with the engine or the vacuum
pump.
–
To do this, connect manual vacuum pump -VAS 6213- to vacuum
hose from connection -B- on brake ...