
Fig. 217 Contents of the vehicle toolkit
First read and observe the introductory information
and safety warningsThe content of the vehicle toolkit depends on the vehicle equipment level. The following describes the maximum scope.
The vehicle toolkit contains the following
Screwdriver with hexagon socket in the handle
for slackened wheel bolts. The screwdriver blade is reversible. The screwdriver
may be located under the box spanner.
Adapter for the anti-theft wheel bolts.
Volkswagen recommends that you carry the wheel bolt adapter in the vehicle toolkit
at all times. The code number of the anti-theft wheel bolt
is engraved on the front of the adapter. You will need this number to replace
the adapter if lost. Make a note of the code number for the anti-theft wheel
bolt and keep it in a safe place – but not inside the vehicle.
Removable towing eye.
Wire hook for pulling off the centre cover,
wheel covers and the wheel bolt caps.
Vehicle jack. Before you return the
jack to the foam rubber holder, you must wind the claw in fully.
Box spanner for wheel bolts.
Crank.
Stowage
HubcapsRepair instructions
Contact corrosion
Contact corrosion can occur if unsuitable fastening elements
(screws, bolts, nuts, washers) are used.
For this reason, only connecting elements with a special
surface coating have been fitted.
In addit ...
Snow chains
First read and observe the introductory information
and safety warnings Please heed legislation and also the permitted speed
when driving your vehicle with snow chains.
In winter conditions, snow chains will not only improve acceleration, but also
braking response.
Snow chains may only b ...
Overview of fitting locations - rear keyless entry system, RHD vehicles
1 -
Luggage compartment aerial for entry and start system -R137-
Removing and installing
→ Chapter
2 -
Interface for entry and start system -J965-
Removing and installing
→ Chapter
...